Metal Bench Lathe Machine 8 * 32 Inch for Milling Drilling Metal Working with Adjustable Speed Three-Jaw Chuck Metric Scale Emergency Stop Switch 900W

Parameters: Motor: brushless motor Voltage: AC110V Power: 900W Length of center: 31.5inch(800mm) Swing Over Bed: 8.3inch(210mm) Rotary diameter of tool rest: 5.51inch(140mm) Spindle bore: 1.50inch(38mm) Diameter of chuck: 4.92inch(125mm) Spindle taper: MT5 Spindle rotation speed: 50-1250rpm/100-2500rpm Range of metric threads: 0.02-0.12inch (0.5-3mm) Precision of the spindle: 0.00039inch(0.01mm) Maximum stroke of tool rest plate: 2.16inch(55mm) Maximum stroke of middle plate: 2.95inch(75mm) Maximum stroke of bottom plate: 26.8inch(680mm) Maximum stroke of tailstock sleeve: 2.36inch(60mm) Tail frame taper: MT2 Lathe sizes: 45.7inch*13.0inch*13.4inch(116*33*34cm) Gross weight: 217.15lbs

• [High Quality] The lathe bed is made of cast iron with high-frequency quenching and precise grinding. It adopts high quality spindle and bearings with high accuracy, wear resistance and long service life. It is also equipped with metal gears to provide more accurate transmission.
• [Adjustable Speed] The spindle rotation speed of our metal lathe is divided into two levels, 50-1250rpm and 100-2500rpm, which can be adjusted continuously. You can adjust the speed on the digital screen, which is very precise and convenient.
• [Low Noise] The metal lathe is powered by an 110V brushless motor with strong power, low energy consumption and low noise(<75db).
• [User-Friendly Design] The metal bench lathe machine is equipped with an emergency stop switch for immediate shutdown in case of emergencies. The three-jaw chuck with 4.92inch clamping diameter is used to clamp square and round materials firmly. The adjustable 4-way tool post on the lathe allows you to change your cutting tools easily. With the MT2 taper in tailstock spindle, this lathe machine is capable of adjusting set screws for accurate operation.
• [Widely Used] This miniature lathe is mainly used for processing the end faces of various rotary surfaces and rotating bodies. For example, the lathe is used for turning the inside and outside of cylindrical surfaces, conical surfaces, ring grooves, forming turning surfaces and turning the end faces and a variety of commonly used metric threads.